MARC & SONS Diver Watch series PROFESSIONAL MSD-028-9S
Waterproofness of your watch
100 bar ≈ 100 ATM (≈ 1000 m)
The watch is tested for water tightness up to 100 bar. This corresponds to the pressure of an assumed water column of 1000 meters. The watch is suitable for daily use as well as professional diving sport.
Information about the used luminous material
The illuminant used is called Luminova. Luminova is understood to mean pigments which are luminesced by excitation with artificial or daylight. Light colors are, for example, green, yellow or red.
Information about the movement SII NH35
The caliber SII NH35 is a robust and very reliable mechanical movement, which works on the basis of the legendary Seiko 7S26 caliber. It has a hand lift and a second stop. The range deviation is indicated as -20 to + 40 seconds per day. According to experience, however, the work runs much more precisely, in some cases with a deviation in the single-digit second range. Furthermore, the plant has a date-short-circuit. The reserve is 41 hours.
Informationen about a Ceramic bezel
A ceramic base is a component consisting of a so-called technical ceramic, which has recently gained in importance in the watch industry. These beads are pressed under high pressure and fired at above 1400 ° C. This makes the strings extremely resistant, resistant and scratch-resistant. Its silky sheen is obtained by polishing the diamonds after production.
Informationen about sapphire crystal
Visually, there is hardly any difference between a sapphire crystal and a mineral glass. The specific material properties are considered, large differences can be observed. In contrast to the mineral glass, which resembles the quartz in its chemical structure, the sapphire glass is made synthetically and consists of high-purity aluminum oxide. A sapphire glass has a hardness of nine, which corresponds exactly to that of the natural precious stone sapphire, from which the name for the glass was derived. Mineral glasses have only degrees of hardness of six to seven. Due to the material properties, sapphire glass is extremely resistant, scratch-resistant and is also particularly resistant to breakage. Despite heavy usage a sapphire glass still looks like after the first day.
Professional 1000m automatic diving watch for the highest quality demands Made in Germany
The MARC & SONS MSD-028 series is a versatile range of diver watches for professionals. The watch impresses with its own design and high-quality workmanship. The 46 mm and very robust case is equipped with an antireflective sapphire glass as well as a helium valve and is pressure tested up to 100 ATM. The unidirectional rotating bezel has a black ceramic inlay.
The watch is powered by an automatic movement from Seiko. The movement NH35 impresses with its reliability and is fine-tuned by our watchmakers before the assembly. The model MARC & SONS MSD-028-9S has a well-readable blue black dial with color gradient and luminous indices.
In addition to the classic stainless steel strap, the watch can also be combined with a dive-type rubber band, a leather strap or a sporty Natoband, thus forming the perfect combination of sportiness, aesthetics and functionality.
Professional 1000m Automatik Diver Watch - Made in Germany
- Stainless Steel 316 L
- Sapphire crystal, antireflective
- Bezel: ceramic black
- Screwed stainless steel back with engraved logo
- Pressure tested up to 100 ATM
Seiko (SII) NH35
- 24 Jewels
- Hacking: yes
- Power Reserve: 41 hours
- Hour, minute, central second, date
- Screw down crown
- Helium valve
Dial & Hands
- Dial: blue black color gradient
- Luminous indexes
- Luminous hands
- Minute hand orange
- Central second hand
Bracelet & Clasp
- Bracelet: stainless steel 22 mm
- Clasp: Folding clasp with stainless steel safety clasp
- Band length: 21 cm
- Case: 46 x 55 mm
- Diameter: 46 mm
- Height: 17,7 mm
- Width of bracelet 22 mm
- Total weight: 265g
Scope of delivery